Electronics

Stages Gen 3 single-sided Power L meter is built onto a non-drive-side Shimano GRX RX-810 crank arm. It's compatible with all Shimano GRX Cranksets. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm 175mm Compatibility: - This Shimano GRX RX810 Stages Power meter is compatible with all Shimano GRX cranksets. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Lezyne's Smart Energy Caddy is a lightweight, semi-rigid, top-tube-mounted smart phone caddy made from molded EVA foam with a durable woven nylon cover. Its clamshell pod design opens to provide easy access, and a mesh divider helps keep items in place. The Smart Energy Caddy's smart phone pocket holds any popular 4-5" phone model, and features a clear touch screen-compatible panel for full control of your phone. Three Velcro straps attach your caddy to your bike's top tube.

Instant bike dashboard With a sleek, low profile, Delta's X-Mount Pro universally adapts to all phones. Updated models include mounting suited for your Garmin and Wahoo systems, when your smartphone just isn't enough. An all-in-one solution with a single mount, each of your screens stay visible and secure, so navigation and your favorite apps are always within reach. Features Secure - Composite construction securely holds your phone Compatibility - Silicone stretch web material secures any phone with any case Universal - Updated models include mounting suited for your Garmin and Wahoo systems. An all-in-one solution within a single mount, each of your screens stay visible and secure. Construction - Aluminum with silicone stretch web. Aesthetic design offers riders a low-profile mount Quick Assembly - Mount drops under stem cap Weight - 0.11 lbs / 50 grams

CatEye's Velo 9 features a large easy-to-read display and one large button for changing modes, making this sleek, wired computer easy to use. On top of all the standard functions the Velo 9 also has a calorie counter to help you track your energy expenditure and a carbon offset calculator to monitor your good will towards the environment. You'll also love CatEye's tool-free Flex-Tight mount for easy installation and removal.

The Cateye Velo Wireless Computer packs a punch with a programmable odometer and menu screen. It installs easily on almost any bike, including 27.5 and 29’ers. - Computer functions: Current/ average/ maximum speed, trip distance, total distance, elapsed time, clock, calorie consumption - Analog wireless computer - Pace arrow - Simple tire size - Auto start / stop - Programmable odometer - Menu screen to change setting - Includes zip tie bracket

Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike. - Computer compatibility: Garmin, Wahoo - Accessory compatibility: GoPro - Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport - Lifetime warranty

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

- Universal: adaptator compatible with all smartphones - Sticks directly on phone or phone case - 3M VHB adhesive that dampens vibrations and has an extreme adhesive capacity - Quarter-turn type Z-Mount allows to lock and unlock your phone in seconds - Bi-material: overmolding guarantees flexibility and high resistance

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

- Roll-top, waterproof smartphone case desingned for universal use - Touch screen compatible - Clear window for camera use - Simple-to-use smartphone mount for bikes - Easy installation in one click - 360 degrees adjustable angle

- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

For CubiCubi 500 / 850 / 1200 - 3.7V 6000mAh Li-ion power bank - Recharge via a micro-USB cable - Charge time (approx) : 4-6hr - Charge phone and other devices with USB charge cable - Input: Micro-USB (5V/1A) - Output: USB (5V/1A)

Band style clamp with integrated QuickClick mount for fast, easy attachment and removal of Topeak Ratchet Rocket tool case and SmartPhone DryBag. - Fits 22mm-44mm tubes

Fast and easy attachment of Topeak Tablet DryBag.

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

Symmetry is a beautiful thing. This RideCase mount brings everything in line, front and center to offer easier viewing of your device, a perfectly centered video frame, or a light beam cast in the center of your route. Attaches to 31.8mm diameter handlebars and the QuickClick holder can be rotated for both portrait and landscape orientation. The included sport camera adapters are compatible with different sport cameras like GoPro Hero series, Sony Action Cam series, Shimano Sport Cameras, and Garmin VIRB X / XE. Includes G-Ear Adapter for Garmin cycle computer. - Material: Forged aluminum / Engineering grade plastic - Bracket: For Handlebar (fits 31.8mm) - Max Load: Sport camera 200 g / 7.04 oz - Added Features: Angle adjustment (Sport Camera) Rotates for landscape or portrait viewing (RideCase) - Compatible with RideCase series & PanoComp X Includes T15 wrench - Size: 11 x 6.6 x 4.7 cm / 4.3” x 2.6” x 1.9” (Center Mount only) - Weight: 36 grams

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing

Sport Camera Multi-Mount with quick release for mounting GoPro Hero series, Sony Action Cam series, Shimano Sport Camera, and Garmin VIRB X / XE on helmet, handlebar or saddle rails. Features angle adjustment for tilt and can be oriented for landscape or portrait modes. - Added Feature: Angle adjustment landscape or portrait orientation - Brackets: For Handlebar (fits 22.2 & 31.8mm) / Helmet / Saddle rails - Material: Engineering grade plastic - Max Load: Sport camera 200 g / 7.04 oz - Modular Multi-Mount Device: Adapters included for GoPro/Shimano Sport Camera/Garmin VIRB X/XE and Sony Action Cam

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

Dual band, Bluetooth, ANT +, heart rate sensor with strap. - Battery: 2032 Battery Life is 900+ hours - Sensor Range: 30 bpm - 230 bpm ANT+ and Bluetooth data sensor compatibility - Sweatproof - YES!

The new Gen 3 single-sided Stages Power R meter is built on to a driveside Shimano Dura-Ace R9100 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Record 12s crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Record or Chorus crank arm. It will NOT mate with a Campagnolo Super Record crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Super Record crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Super Record 12s crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide