Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$36.99
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$50.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
$64.99
- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included
$49.99
- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)
$4.99
Band style clamp with integrated QuickClick mount for fast, easy attachment and removal of Topeak Ratchet Rocket tool case and SmartPhone DryBag. - Fits 22mm-44mm tubes
$159.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$219.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
$69.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. Featuring an accessory bolt hole pattern, it can be used with Stages accessories. - For Stages Dash L10, L50 and M50 - Fits Blendr-compatible stems - Works with Stages accessories, including GoPro attachment
$69.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. - Designed to mount Dash above additional accessories or to the Blendr stem with a bottom attachment - For Stages Dash L10, L50 and M50 - Fits Blendr compatible stems
$76.99
This mount fits most integrated bar/stem designs with a two-bolt interface below stem. - Mounts to a 2-bolt pattern (parallel to the direction of a stem) integrated handlebar (bolts not included) - Holds the dash level to the bars and in front of the bike. - For Stages Dash L10, L50 and M50 - Fits Shimano PRO and some Canyon integrated bars
$43.99
Place Dash behind the bar for improved visibility and better protection from mishaps on the trail. - Mounts to the left of the stem, holds the Dash above the stem and bars such that a crash will not break the Dash - Has a plastic clamp that requires 2.5mm allen key to tighten to handlebars - Has rubber spacer so the mount can be used on 31.8mm bars. No accessories can be bolted to the bottom of the mount. - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm and 35mm bars
$76.99
Attaches Dash to steer tube beneath top cap. Great for mountain bikes and setups with minimal handlebar space. - Mounts to the top cap of a bike by replacing a headset spacer - Angle can be controlled by loosening and tightening the pivot bolt - For Stages Dash L10, L50, and M50 - Fits all 1-1/8" headsets with room for a spacer over the stem
$43.99
This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle
$62.99
Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status
$62.99
Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status
$106.99
The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only
$224.99
- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger
$7.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
$188.00
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
$172.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
$87.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
$24.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$33.00
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$43.96
MORE POWER, WITH SECURITY, MORE COMFORT. Water-repellent mobile phone case for the bicycle handlebar Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving. For attachment to the COMPIT mobile phone holder system When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm. - Only compatible with the COMPIT system - Extra storage space - Water-repellent - Can be operated through foil - For all common smartphones - Weight: 115g
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone X/XS
$28.79
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone XR/11
Page 1 of 4 Next page