New Arrivals

• Square taper interface • Only includes left crank

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

Always needed. Quality tested and a great value, the 0.9mm thick butyl rubber innertube strikes the perfect balance between weight and durability. Where it thrives: In the garage, on the bike What it's built for: Durability, Fixing Highlights: - Schrader valve (American valve) with a removable valve core - 0.9mm wall thickness - Each tube passes a 24 hour air hold test prior to packaging

This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

"Ideal for use on carbon fibre handlebars, stems and seat posts, our carbon assembly paste is a specially formulated blend of highly refined natural oils and ultra-fine non-slip pumice particles, designed to eliminate slip between carbon fibre components. Gripper paste increases the friction between carbon fibre components and their mating surfaces, reducing the torque required to clamp them. Our non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions. APPLICATION INSTRUCTIONS 1) Using a clean cloth or brush, apply gripper paste to both surfaces of the clamping area. 2) Immediately assemble and tighten clamps according to manufacturer’s instructions. 3) Wipe off any excess. KEY POINTS - For use on carbon fibre handlebars, stems & seat posts - Eliminates slip on clamped parts & prevents seizing - Made of renewable, natural oils and pumice particles - Readily Biodegradable - 100% PCR & PIR Recycled Packaging - M15 threaded cap"

BAT adjuster dial kit for Magura brakes.

Enduro 6900 ABEC-5 Sealed Bearing. Dimensions: OD: 42mm / ID: 30mm / Width: 7mm ABEC-5 - Grade 5, 5/32" chromium steel balls Kyodo Yushi SRL grease or equivalent Imported Sold individually

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Safe for metal, plastic, rubber and seals

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

External cam quick release skewers with a neat, security-boosting trick up their sleeve. - Once installed simply remove the threaded lever for added anti-theft piece of mind - Two levers included and supplied with convenient keychains for quick-and-easy access - Fits both road and mountain bike frames and forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with plastic-coated lever and alloy body/acorn-nut - Sold as a front and rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 49g (FR) / 54g (RR)

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

The Mudguard fender mounts easily and cleanly to your fork; a direct-mount design eliminates the need for fork-scratching zip ties and ensures your line of sight stays clear. It also reduces maintenance downtime by minimizing the amount of debris hitting your stanchions and fork seals. - Direct-mount design, no zip ties needed - Fits FOX 36 - 38 forks

• Silicone material for improved grip in all conditions • Excellent shock absorbtion • Offset geometry for increased comfort and a lower weight • Avaibable in 30mm (Slim) and 32mm (Standard) thickness • Length 130mm • Weight from 55 g.

The Pro Side Cage is an aluminum side-pull bottle cage designed for easy access to bottles with small frames and full suspension bikes while maintaining secure clamping. - Fits 74mm bottles - Bolts included - Weight: 46g

- FitRite retention dial for one-hand adjustment - 6 vents help keep your child cool and comfortable - Child universal fit 44-50cm

The Shimano Tourney RD-A070 rear derailleur provides durable and reliable shifting for 7-speed drivetrains. - Smartcage design with 11/13t pulleys allows for short cage and a 28t max low cog - Maximum cog size: 28t - Total capacity: 37t

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled "fish scale" design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance. - Center scales are ramped, providing a fast rolling leading edge, yet sharp effective braking and cornering edges - Exclusive 3C compound construction featuring Graphene compound technology - File-tread Gravel and Cyclocross race tire, designed for a range of conditions - Folding bead approved for use with hookless rims - Wire bead not approved for use with hookless rims

When you live each second on the bike with fervor, you need a luxurious performance sock. Meet the HRc Team, the ultimate sock for training and racing.

- Strong rubber straps securely hold phone - CNC machined aluminum mount - Replaceable rubber strap - Come with 2 sizes of straps to fit most smartphones

SRAM 20mm Post-Mount Adapter Hardware included

Most riders should protect the lowers and crowns of their Road & Gravel forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

Designed for caliper & cantilever brakes. - Aluminum construction - Fits: 19 - 21mm bar ends - Will fit on bullhorn-style bars - 164g pair

- SLX/105 chain 11-speed chain - Sil-Tec surface treatment on roller plates only - Weight: 257g - Now with quick link - Refer to Documents and links to find the right product