Fenders

- Made of resistant plastic - Fits all frames - Blade width: from 50 to 70mm

- Made of Polypropylene with dual material spoiler - Seat post adjustable clamp - Fit seat post Ø 25 – 32 mm - 47 to 60 mm blade width - Reflective strip - Weight: 125g

- Design for road bikes - Installation and angle adjustment without tools - Made of ultra-resistant black polymer resin - Mounts onto the seat post - Blade width: 45 mm

These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.

These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.

Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame. - Urban fender set - Sturdy aluminum profile design for urban bikes - Black U-stay - Includes accessory parts and stays - Weight: 568g

- Color: Black - Maximum Tire Width: 35 mm - Fender Width: 45 mm - Wheel Size: 700c - Material: Aluminum - Requires Eyelets?: Yes

The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR or ESC safety system ensures that the struts are decoupled if branches get between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ESC safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 2.1"-2.4" - Tire width in mm: 54-61mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm

Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm

Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.

Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

Gravel away in rain, show, sleet or shine. The new RockShox premium short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at 3-bolt mounts and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts ensures secure attachment - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all Rudy XPLR models

- Adapts to 700C wheels - Made of shock resistant polymer

- Universal mounting on downtube - Easy assembly by rubber straps - Dual injection construction with polypropylene and rubber - Larger protection

The new EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm). Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your FOX forks. Compatible with older (2017) onwards FOX 34 & 36 forks which have bolt holes in the brace. Also compatible with the fork brands below (separate adapter kits are required): - Rock Shox Zeb - Rock Shox Recon Gold or Silver 35 - DVO Onyx SC, Sapphire, & Diamond - Ohlins RXF 38 (2019+) & DH - Total length: 515mm (Rr extension 330mm, Fr extension 185mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - 125g

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements: 1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds 2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping 3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses. - 690mm long x 105mm wide Comes supplied with: - x2 helitape sheets - x4 velcro straps - x2 rubber damping strips - x1 BB extension (230mm long x 80mm wide) - Designed and made in the UK from recycled polypropylene - 280g (w/o fittings)

The Mudguard fender mounts easily and cleanly to your fork; a direct-mount design eliminates the need for fork-scratching zip ties and ensures your line of sight stays clear. It also reduces maintenance downtime by minimizing the amount of debris hitting your stanchions and fork seals. - Direct-mount design, no zip ties needed - Fits FOX 36 - 38 forks

- TPR mud flap - Compatible for 24'' to 26'' wheels - Quick mount system

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting